A dissipation‐free numerical method to solve one‐dimensional hyperbolic flow equations

In this paper, a numerical method to capture the shock wave propagation in 1‐dimensional fluid flow problems with 0 numerical dissipation is presented. Instead of using a traditional discrete grid, the new numerical method is built on a range‐discrete grid, which is obtained by a direct subdivision of values around the shock area. The range discrete grid consists of 2 types: continuous points and shock points. Numerical solution is achieved by tracking characteristics and shocks for the movements of continuous and shock points, respectively. Shocks can be generated or eliminated when triggering entropy conditions in a marking step. The method is conservative and total variation diminishing. We apply this new method to several examples, including solving Burgers equation for aerodynamics, Buckley‐Leverett equation for fractional flow in porous media, and the classical traffic flow. The solutions were verified against analytical solutions under simple conditions. Comparisons with several other traditional methods showed that the new method achieves a higher accuracy in capturing the shock while using much less grid number. The new method can serve as a fast tool to assess the shock wave propagation in various flow problems with good accuracy.     

Phosphorylation of graphehe oxide to improve adsorption of U(VI) from aquaeous solutions

Journal of Radioanalytical and Nuclear Chemistry - The graphene oxide (GO) was functionalized with phosphate groups and applied as an effective adsorbent for the removal of uranium from aqueous...     

厚度诱导的YBa2Cu3O7-δ超导薄膜剩余应力及临界电流变化

本文通过脉冲激光沉积法制备了不同厚度(80nm、320nm、1000nm和2000nm)的YBa2Cu3O7-δ(YBCO)超导薄膜,对它们的剩余应力和临界电流特性进行了对比研究.通过系列的激光显微Raman光谱和磁化曲线测量分别获得了薄膜剩余应力和磁化临界电流密度(Jc)对薄膜厚度的依赖关系.结果显示超导薄膜内剩余应力越小,Jc越高.对于中等厚度的薄膜样品(320nm和1000nm),其膜内剩余应力较小,同时由其特征的磁通匹配场大小推知在该厚度范围内的样品具有较高的线性缺陷密度,从而显示出较高的Jc值.     

Hypercoal对不同炼焦煤炭化改质作用的显微镜研究

Hypercoal(HPC)被作为一种添加剂加入到两种性质不同的炼焦煤中,以探讨其对炼焦煤炭化的改质作用。通过偏光显微镜以及扫描电镜观测炭化产物的组织结构变化。结果表明,添加剂的用量以及粒径对炼焦煤炭化改质作用的大小与原料煤的煤质有关,对焦煤改质时要求添加剂颗粒的粒径较大;而对弱黏结性煤改质时,添加剂粒径较小且添加量较多更有利于黏结和熔融作用。通过添加HPC可改善焦煤因过度膨胀造成的不均匀孔隙结构,而且孔的数量与孔径减小,孔壁增厚;添加剂在炭化过程中产生的胶质体促进了弱黏结性煤的黏结和熔融,改善了炭化产物的结构。实验还考察了原料中水分、成型压力等因素对炭化产物结构的影响。结果表明,煤中水分会在炭化产物中产生特殊的孔隙结构,而成型压力对炭化改质作用则因原料煤质不同而不同。     

Mannose‐based graft polyesters with tunable binding affinity to concanavalin A

Glycopolymers have been widely used to understand the interactions between carbohydrates and lectins, which facilitate the diagnosis and detection of disease and pathogens as well as the development of vaccines. While studies have been focused on the correlation of glycopolymer structure and their binding to lectins, graft‐type glycopolyesters are uncommon. Herein, we report the design and synthesis of mannose‐based graft polyesters by “grafting‐from” method and investigate their interactions with Concanavalin A (Con A). As confirmed by ¹H NMR spectroscopy and sulfuric acid‐UV method, graft polyesters with different lengths of mannose graft were successfully synthesized. Our results from turbidimetry binding assay showed that graft polyesters with longer mannose graft exhibit higher initial binding rate (k_i). Isothermal titration calorimetry measurements of these graft polyesters with Con A showed that polymers exhibit higher binding affinity (k_a) with the number of side chain mannose. This study provides understanding of the interaction between Con A and mannose‐based graft polyesters, which can be employed for the development of glycopolymeric therapeutics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3908–3917     

一例具有单分子磁体行为的单核钴-氮氧自由基异自旋配合物

合成并表征了一例2p-3d异自旋配合物[Co （hfac）₂（NIT-PyzMe-PhCHO）]（1），其中hfac=六氟乙酰丙酮，NIT-PyzMe-PhCHO=2-（3-（1H-咪唑-1-亚甲基）苯甲醛）-4，4，5，5-四甲基咪唑啉-1-氧基-3-氧化物。配合物1是单核结构，Co^Ⅱ离子与直接配位的氮氧基团之间存在强的反铁磁耦合。此外，与磁弛豫相关的频率依赖的虚部信号证实了其单分子磁体行为。     

Methods for enhancing the capacity of electrode materials in low-temperature lithium-ion batteries

Lithium-ion batteries(LIBs) have evolved into the mainstream power source of ene rgy sto rage equipment by reason of their advantages such as high energy density,high power,long cycle life and less pollution.With the expansion of their applications in deep-sea exploration,aerospace and military equipment,special working conditions have placed higher demands on the low-temperature performance of LIBs.However,at low temperatures,the severe polarization and inferior electrochemical activity of electrode materials cause the acute capacity fading upon cycling,which greatly hindered the further development of LIBs.In this review,we summarize the recent important progress of LIBs in low-temperature operations and introduce the key methods and the related action mechanisms for enhancing the capacity of the various cathode and anode materials.It aims to promote the development of high-performance electrode materials and broaden the application range of LIBs.     

Large-surface mesoporous TiO2 nanoparticles: Synthesis, growth and photocatalytic performance

This study demonstrates a facile and effective method to generate mono-dispersed titanium dioxide spheres at ambient conditions. The size of the colloids can be controlled from 60 to 500 nm by optimizing experimental parameters (e.g., concentration, time, and temperature). Anatase TiO₂ can be obtained through titanium glycolate colloids generated in acetone via two ways: water boiling approach and calcination at a high temperature of 500 °C. Particle characteristics (shape, size, and size distribution) were measured by advanced techniques, including transmission electron microscope (TEM), thermo-gravimetric analysis (TGA), UV/Vis absorption spectrum, nitrogen gas adsorption and desorption isotherms Brunauer-Emmett-Teller (BET) surface area measurement, and X-ray diffraction technique (XRD). The possible mechanism of nucleation and growth of such colloids was discussed. The role of acetone in the formation and growth of titanium glycolate colloids was also investigated by Fourier transform infrared (FT-IR) spectroscopy. Finally, the photocatalysis performance of such anatase TiO₂ particles was tested and proved to be efficient in degradation of organic dyes (e.g., phenolphthalein and methly orange).     

Adaptive fixed-time synchronization of Lorenz systems with application in chaotic finance systems

Nonlinear Dynamics - This paper concerns the problem of fixed-time synchronization of master–slave Lorenz systems. The adaptive control and fixed-time control strategies are successfully...     

Extinction Effects of Multiplicative Non-Gaussian L′evy Noise in a Tumor Growth System with Immunization

The extinction phenomenon induced by multiplicative non-Gaussian Levy noise in a tumor growth model with immune response is discussed. Under the influence of the stochastic immune rate, the model is analyzed in terms of a stochastic differential equation with multiplicative noise. By means of the theory of the infinitesimal generator of Hunt processes, the escape probability, which is used to measure the noise-induced extinction probability of tumor cells, is explicitly expressed as a function of initial tumor cell density, stability index and noise intensity. Based on the numerical calculations, it is found that for different initial densities of tumor cells, noise parameters play opposite roles on the escape probability. The optimally selected values of the multiplicative noise intensity and the stability index are found to maximize the escape probability.